> For the complete documentation index, see [llms.txt](https://gathery.gitbook.io/machineguide/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://gathery.gitbook.io/machineguide/l2-and-l2max-recommend-parameters.md).

# L2 and L2MAX Recommend Parameters

### RECOMMENDDE PARAMETERS FOR COMMON MATERIALS

Common materials and recommended engraving parameters for 5W output laser

<figure><img src="/files/yxEpv21esxu5FUv0GLPB" alt=""><figcaption></figcaption></figure>

Common materials and recommended cutting parameters for 5W output laser

<figure><img src="/files/SqfAtENrzLQDvsmkwwIa" alt=""><figcaption></figcaption></figure>

Common materials and recommended engraving parameters for 10W output laser

<figure><img src="/files/tdRJ0qIlsuz820QCJUJe" alt=""><figcaption></figcaption></figure>

Common materials and recommended cutting parameters for 10W output laser

<figure><img src="/files/xWPsXJJ5mC87JeayuVWf" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/Q9pQU0T7C1t4XrCDxahp" alt=""><figcaption></figcaption></figure>