L2 and L2MAX Machine Guide

Accessory List

MACHINE INSTRUCTION

Please rotate the emergency STOP button before using. Otherwise the machine cannot be turned on.
For better visual effect, please remove the protective film starting from the four corners of the enclosure.
If the enclosure is cracked, please contact customer service email: service@woxcker.com.
Note: For eye safety, the laser engraving machine automatically stops working when the cover is opened. This is the setting of the machine and is normal.
If you have any questions about using the machine, please contact customer service email: service@woxcker.com or search “Woxcker L2 laser engraver”on YouTube to find the corresponding tutorial.

HOW TO CONNECT TO THE APP

Turn on the laser engraver and insert the TF card.
Connect your mobile phone to WIFI: WOXCKER_L2, the password is 12345678
Open the engraving App on your mobile phone (described in the software manual)
Enter IP: 192.168.0.1 in the APP to connect.

MACHINE STRUCTURE DIAGRAM

Parts List：

Front X-axis module ①, rear X-axis module ②, left Y-axis module ③, right Y-axis module ④, middle X-axis module ⑤, laser module ⑥. (If you have any questions about installation, please watch the installation video inside the TF card or contact customer service email:E-mail: Service@woxcker.com)